Filter
Top Products
52
Chapter 6: Using the Web-based Utility
The Voice Tab
IP Telephony System
VMWI Refresh Intvl. This is the interval between the VMWI refresh events to the CPE. The default is 0.
Interdigit Long Timer. This is the long timeout between entering digits when a caller is dialing. The range is 0 to
64 seconds. The default is 10.
Interdigit Short Timer. This is the short timeout between entering digits when a caller is dialing. The range is 0
to 64 seconds. The default is 3.
CPC Delay. CPC stands for Calling Party Control. The CPC Delay is the delay after the caller hangs up when the
System will begin removing the tip-and-ring voltage from the attached equipment of the called party. The range is
0 to 255 seconds, and the resolution is 1 second. The default is 2.
CPC Duration. This is the length of time the tip-to-ring voltage is removed after the caller hangs up. After that,
the tip-to-ring voltage is restored, and the dial tone will apply if the attached equipment is still off-hook. The CPC
is disabled if this value is set to 0. The range is 0 to 1.000 seconds, and the resolution is 0.001 seconds. The
default is 0.
Vertical Service Activation Codes
Call Return Code. This code calls the last caller. The default is *69.
Call Redial Code. This code redials the last number called. The default is *07.
Blind Transfer Code. This code begins a blind transfer of the current call to the extension specified after the
activation code. The default is *98.
Call Back Act Code. This code starts a callback when the last outbound call is not busy. The default is *66.
Call Back Deact Code. This code cancels a callback. The default is *86.
Call Back Busy Act Code. This code starts a callback when the last outbound call is busy. The default is *05.
Cfwd All Act Code. This code forwards all calls to the extension specified after the activation code. The default is
*72.
Cfwd All Deact Code. This code cancels call forwarding of all calls. The default is *73.
Cfwd Busy Act Code. This code forwards busy calls to the extension specified after the activation code. The
default is *90.
Cfwd Busy Deact Code. This code cancels call forwarding of busy calls. The default is *91.
Figure 6-32: Voice - Regional Screen - Vertical Service
Activation Codes
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560