Linksys SPA9000 Network Card User Manual


 
22
Chapter 6: Using the Web-based Utility
Overview
IP Telephony System
Chapter 6: Using the Web-based Utility
Overview
When you first install the System, Linksys strongly recommends that you use the Setup Wizard, which you can
download from www.linksys.com. If you do not wish to run the Setup Wizard, you can use the Web-based Utility
to configure the System.
The System may have been pre-configured by your Internet Telephony Service Provider (ITSP), so you may not
have to make any changes. If you do wish to make changes, follow the instructions in this chapter.
The Web-based Utility offers two levels of access: user and admin (administrator). Your level of access depends
on your service provider’s policies. Also, access to some settings may be protected or blocked, so that service
settings cannot be accidentally changed. For more information, contact your ITSP.
This chapter will describe each web page of the Web-based Utility and each page’s key functions. The Internet
connection settings are configured on the Router - WAN Setup screen, while some of the most popular features:
auto-attendant, music-on-hold, and call hunt are configured on the Voice - SIP screen. The Utility can be
accessed via your web browser through use of a computer on your network.
There are two main tabs: Router and Voice. Additional tabs will be available after you click one of the main tabs.
Router
Status. This screen displays routing information about the System.
WAN Setup. Use this screen to configure the Internet connection, MAC clone, remote management, QoS,
VLAN, and optional settings.
LAN Setup. Use this screen to configure the local network, dynamic DHCP, and static DHCP lease settings.
Application. On this screen, configure port forwarding, DMZ, and reserved ports range settings.
Voice
Info. This screen displays voice-related information about the System.
System. Use this screen to configure system settings. In most cases, you should not change these settings
unless instructed to do by your ITSP.
NOTE: If you are not sure how to configure the
settings, then keep the default settings.
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560