Filter
Top Products
28
Chapter 6: Using the Web-based Utility
The Router Tab
IP Telephony System
DNS Server Order. Select the order in which the DNS servers should be used: Manual; Manual, DHCP; or DHCP,
Manual. The default is Manual.
DNS Query Mode. Select how the DNS servers should be queried: Parallel or Sequential. The default is
Parallel.
Primary NTP Server. Enter the IP address of the primary NTP server, which the System uses to keep the date
and time current.
Secondary NTP Server (optional). Enter the IP address of the secondary NTP server.
MAC Clone Settings
Enable MAC Clone Service. Select whether you want to clone a MAC address onto the System, yes or no. The
default is no.
Cloned MAC Address. Enter the MAC address you want to clone.
Remote Management
Enable WAN Web Server. This feature lets you enable or disable access to the Web-based Utility from the WAN
side. Select yes or no from the drop-down menu. The default is no.
WAN Web Server Port. Enter the port number used to access the Utility from the WAN side. The default is 80.
QOS Settings
QOS QDisc. QoS prioritizes voice communications when different types of traffic are competing for bandwidth.
Select the method you want to use: NONE, CBQ, or TBF. The default is NONE.
Maximum Uplink Speed. Enter the maximum upload speed of your Internet connection. The default is 128Kbps.
VLAN (Virtual Local Area Network) Settings
Enable VLAN. VLAN (802.1Q) settings let you use the System in a virtual LAN environment. Select yes or no from
the drop-down menu. The default is no.
VLAN ID. Enter the ID number used by the System. The default is 1.
When you have finished making changes, click the Submit All Changes button to save the changes, or click the
Undo All Changes button to undo your changes.
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560