Filter
Top Products
D8B Manual • Appendices • page 176
D8B
Button
Number D8B Button Mapped HUI Button
Global
Mode
General HUI Layer
Comments Soundscape Function
Fader 17-24 Fader 1-8 N
Channel V-Pot
17-24
Channel V-Pot 1-8 N
Mute 17-24 Mute 1-8 N
Solo 17-24 Solo 1-8 N
Select 17-24 Select 1-8 N
Record Ready
17-24
Record Ready 1-8 N
Assign 17-24 VSel 1-8 N
Alt+Assign 17-
24
Insert 1-8 N
Write 17-24 Auto 1-8 N
1 Level to Tape Aux Mute N
2 Digital Trim Shift (flip) N
3 Aux 1 Send A N
4 Aux 2 Send B N
5 Aux 3 Send C N
6 Aux 4 Send D N
7 Aux 5 Send E N
8 Aux 7 Rec Ready All N
9 Aux 9-10 Bank Left N
10 Aux 11-12 Bank Right N
11 Aux 9-10 Pan Channel Left N
12 Aux 11-12 Pan Channel Right N
13 Pan Pan N
14 Shift N
Shift + Masters N/A Y
Go to HUI Layer on
D8B
D8B VFD Display
N
D8B VFD V-Pots N
Alt+Right D8B
VFD V-Pot
Scroll N
D8B VFD Select
Buttons
N
Previous / Next N/A N
15 On Assign N
16 Setup Compare N
17 Memory A Bypass N
18 Memory B Insert N
19 EQ Window Transport N
20 Gate Window ALT N
21 Compressor Window Edit N
22 Plug-ins Window Status N
23 Load Patch Window Mix N
24 Save Patch Window Mem Loc N
25 Assign Bus 2 Auto Enable Send N
26 Assign Bus 3 Auto Enable Plug-in N
27 Assign Bus 4
Auto Enable Send
Mute
N
28 Assign Bus 5 Auto Mode Read N
29 Assign Bus 7 Auto Mode Latch N
30 Assign Bus 8 Auto Mode Write N
31 Assign L-R Shift/Add N
32
Assign Route To
Tape
Save N
33
Automation
Bypass
Auto Mode Off N
34
Automation
Faders
Auto Enable Fader N
Move corresponding Soundscape channel Output Element Fader
Move corresponding Soundscape channel Output Element Pan or Send Level
Mute corresponding Soundscape channel Output Element
Solo corresponding Soundscape channel Output Element
N/A
Record Arm corresponding Soundscape channel Track Insert (only one track insert can be controlled)
Toggle Mute Status of corresponding Soundscape channel Send for selected Send A-E. If Level To Tape (HUI Aux Mute) is lit,
then it will toggle the mute status of the corresponding Soundscape channel Input Element.
Select corresponding Soundscape channel for Effect Editing in VFD
N/A
When lit, channel Assign (VSel) toggles the Mute status of the corresponding channel send. When not lit,
channel Assign (VSel) toggles the Mute status of the corresponding channel Input Element.
When lit, V-Pots control the panning of the selected send or they control the Y Axis panning of a surround panner if Pan is selected.
Enables control of first Aux send on a channel with HUI layer V-Pots
Enables control of second Aux send on a channel with HUI layer V-Pots
Enables control of third Aux send on a channel with HUI layer V-Pots
Enables control of fourth Aux send on a channel with HUI layer V-Pots
Enables control of fifth Aux send on a channel with HUI layer V-Pots
Arm or disarm all available tracks containing track inserts (only the first track insert per column is controlled)
Shifts HUI layer to left by 8 to view previous 8 faders
Shifts HUI layer to right by 8 to view next 8 faders
Shifts HUI layer to left by 1 to view previous fader
Shifts HUI layer to right by 1 to view next fader
Enables control of VST Channel Settings Pan on HUI layer V-Pots
Go to HUI layer on D8B
Displays Plug-in Parameters and values for the selected Insert Channel
Adjust the plug-in parameter displayed above it in the VFD
Shift to next/previous parameter in VFD for the current plug-in
N/A
N/A
Change between normal HUI VFD mode and channel HUI VFD Mode. See note below.
Toggles the bottom line of the VFD to display the parameter names or the parameter values for editing.
N/A
Bypasses the currently selected Plug-in
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Shifts to second function of some buttons. Used to select multiple values of some parameters.
N/A
N/A
N/A
Last Updated: 2/07/03
16220 Woodinville Redmond Rd. NE Woodinville, WA 98072
Tel: 800-258-6883 Fax: 425-806-6312 e-mail: techmail@mackie.com
D8B v5.1 B445 HUI Layer Control Mapping
For Soundscape