Filter
Top Products
D8B Manual • Chapter 3 • page 48
MASTER V-Pot
• Functional as a master Aux level
control when any of the Auxes are
selected in the Master Strip.
• When the PAN icon is highlighted, the
Master V-Pot functions as a front/rear
pan position control for any selected
channel in all Surround Modes (not
stereo).
• The Master V-Pot SOLO button solos
any selected Aux bus.
CUE LEVEL and CUE PAN 1 and 2
• These buttons activate the channel
V-Pots for level adjustments and L-R
panning for Auxes 9/10 and 11/12.
• Selecting CUE LEVEL 1 or 2 activates
the channel V-Pots for individual stereo
send levels and the Master V-Pot for the
selected cue master volume/level.
• Selecting CUE PAN 1 or 2 activates the
channel pan V-Pots for L/R placement.
• Click-drag the channel V-Pot up to
move right; click-drag down to move left.
• Control-click any channel V-Pot to set it
to center position (in PAN) or to unity
(for LEVEL).
• Right-click a channel V-Pot and drag
across several channels to copy its level
or pan to each.
AUX buttons 1–8
• Each button activates the channel V-
Pots for Aux send level adjustment.
• When any AUX button is highlighted in
the Master Strip, the Master V-Pot is
activated to control Master Aux output
level.
• Click on the channel V-Pot and drag up
to increase level; drag down to decrease
level.
• Control-click on the channel V-Pot to
set it to unity gain.
• Right-click a channel V-Pot and drag
across several channels to copy its level
to each.
DIGITAL TRIM
• This button activates the channel V-Pot
to control the digital input level—pre
DSP.
• Click on the channel V-Pot and drag up
to increase level; drag down to decrease
level.
• Control-click on the channel V-Pot to
set it to unity gain.
• Right-click a channel V-Pot and drag
across several channels to copy its level
to each.
TRACKING LEVEL
• This button activates the channel V-Pots to adjust
final post-DSP output level to the multitrack outputs.
• Same control as the onboard LEVEL TO TAPE.
• This control fine tunes the channel output levels
to the multitrack.
• Click on the channel V-Pot and drag
up to increase level; drag down to
decrease level.
• Control-click on the channel V-Pot to
set it to unity gain.
• Right-click a channel V-Pot and drag
across several channels to copy its
level to each.
• When Faders to Tape is selected, the
tracking source channel’s fader and
Tracking Level V-Pot are equivalent
functions.
METERS
• The BOT (bottom) button displays the
channel meters next to the faders in
the faders view.
• The TOP button displays the meters
in a larger view, overlaid across the
Aux section.
• With both BOT and TOP buttons off,
no metering is displayed.
WRITE
• Activates the Master Strip to record
selected automation data by the Main
Fader or Aux Masters.
• Any moves in the Master Strip will be
recorded into automation if the auto-
mation settings are set to receive them.
SELECT
• Activates the Master Fader in the Fat
Channel display.
• Enables the Master Fader and Aux
Masters status to be included in the
“Set Default Levels…” prompt or in
the clipboard operations.
Master INSERT L/R
• Allows any plug-in to be patched into
the main mix outputs.
• Simply choose the desired plug-ins
from the list that pops up when
mouse-clicking the INSERT icon.
• This is a post-master-fader insert.