Filter
Top Products
The battery capacity is the value measured by the UPS microprocessor. It is expressed in Ampere-hours. This
value changes over time depending on the parameters of the battery itself and its environment. This measurement
is used to check that the battery is capable of supplying the rated power in the event of a mains outage.
The backup time is the value calculated by the UPS microprocessor on the basis of measurements carried out on
the battery. It is expressed in minutes. The calculation uses the percent load and the battery charge status at the
time of the measurement.
The load level is the ratio between the power supplied by the UPS to the load at the time of the measurement and
the rated output of the UPS. It is expressed as a percentage.
OUTPUT LOAD LEVEL(%) T=30 days
▼ last read: 05/09/1997
63|0|0|0|0
52|0|0|0|0
63|0|0|0|0
63|0|0|0|0
0| 0| 0| 0| 0
0| 0| 0| 0| 0
BACKUP (min) T=30 days
▼ last read: 05/09/1997
120|0|0|0|0
115|0|0|0|0
110|0|0|0|0
105|0|0|0|0
0| 0| 0| 0| 0
0| 0| 0| 0| 0
BATTERY CAPACITY (Ah) T=30 days
▼ last read: 05/09/1997
97|0|0|0|0
96|0|0|0|0
95|0|0|0|0
94|0|0|0|0
0| 0| 0| 0| 0
0| 0| 0| 0| 0
Galaxy PW™ UPS 100 to 225kVA
Operation4 — 22 86-133060-00 A00