Filter
Top Products
Beyond the Basics
4
Use the numeric keypad to enter the reduction margin you want. If necessary,
press or /
PROGRAM
to move the cursor. Here, we’ve chosen 00mm.
5
Press
ENTER
to save the setting.
Setting the number of rings
You can set how many times your fax machine will ring before answering a call.
Choose from 1 to 9 rings.
1
Press /
PROGRAM
,
J
,0,6,
ENTER
. The
LCD
shows:
2
Use the numeric keypad to enter the number of rings you want, from 1 to 9.
Here, we’ve chosen 4 rings.
Note: If you enter 0 (zero), the machine will beep briefly to warn you that it
can’t accept that setting.
3
Press
ENTER
to save the setting.
Setting ECM
“Line noise,” or static on the line during a call, can easily disrupt the flow of data
from one fax machine to another.
That’s why your fax machine gives you the option of using Error Correction Mode
(
ECM
). When two fax machines communicate while running in
ECM
, the sending
machine automatically checks the data as it sends. If the receiving fax machine can’t
verify the transmission, the first machine will re-send it as necessary.
Note:
ECM
gives you a better chance of transmitting a fax document over a bad
phone line, but it could also slow down the transmission time. And the worse
the line is, the slower the transmission. That’s why the machine lets you
turn
ECM
on or off as needed.
Note: Not all fax machines have
ECM
. If you’ve activated
ECM
and then transmit to
a fax machine not currently using
ECM
, there will be no change in the fax
transmission from a usual, non-
ECM
transmission.
1
Press /
PROGRAM
,
J
,0,8,
ENTER
. The
LCD
shows the current
ECM
setting:
2
Press or /
PROGRAM
until the mode you want appears.
In this example, we’ve chosen Off.
3
Press
ENTER
to save the setting.
ECM Mode: Off
Program/Enter
ECM Mode: On
Program/Enter
Set # Of Rings
# (1-9): 4
Set # Of Rings
# (1-9): 2
Copy Reduc Rate: 75%
Margin(00-85mm): 0
0
2.4