Filter
Top Products
Beyond the Basics
7
Use the numeric keypad to enter up to 230 fax numbers — you can use any
combination of call groups, one-touch keys, speed-dial numbers and manually-
dialled numbers.
Important: Do not press
ENTER
.
Press
BROADCAST
to enter a comma between each number or call group.
Important: Do not insert a comma after the last number.
To enter a speed-dial number, press
SPEED DIAL
/
TEL INDEX
and the number’s
three-digit identifier.
To enter a call group, press
GROUP DIAL
and the group’s identifier number.
Your display can show only 20 characters at a time. To view characters beyond
those 20, press to scroll to the left or /
PROGRAM
to scroll to the right.
Note: To erase characters, press
CANCEL
to erase to the left.
To change just one character in the number, press to move the cur-
sor left, or /
PROGRAM
to move it right. Press
CANCEL
to erase it.
Then re-enter until the number correctly.
8
If you want the broadcast to begin immediately every time you press the key,
press
ENTER
and skip to step 11.
If you want to delay the broadcast, press
COM
-
OPTIONS
,
ENTER
.
9
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05
PM
on the 30th.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05
PM
today.”)
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
10
Press
ENTER
,
ENTER
.
11
The
LCD
asks if you want to program additional settings for this one-touch.
If you do not want to program additional settings, press
ENTER
. Then skip to
step 25.
If you do want to program additional settings, press /
PROGRAM
and
ENTER
.
12
The
LCD
asks which resolution you want to set for this one-touch number.
13
Press /
PROGRAM
until the mode you want appears.
Note: For any of the following settings, choosing “---” tells the machine to
use its default setting for this one-touch key.
14
Press
ENTER
. The
LCD
asks you to select a contrast mode for this programma-
ble one-touch number.
15
Press /
PROGRAM
until the mode you want appears.
16
Press
ENTER
. The
LCD
asks is you want the confirmation stamp on or off for
this programmable one-touch number.
17
Press /
PROGRAM
until the mode you want appears.
18
Press
ENTER
. The
LCD
asks you for the type of confirmation report you want to
set for this programmable one-touch number.
19
Press /
PROGRAM
until the mode you want appears.
20
Press
ENTER
. The
LCD
asks if you want to send a cover page for this program-
mable one-touch number.
21
Press /
PROGRAM
until the mode you want appears.
66: Cover Page: ---
Program/Enter
66: Conf.Report: ---
Program/Enter
66: Stamp: ---
Program/Enter
66: Contrast: ---
Program/Enter
66: Primary: ---
Program/Enter
66: Option: Off
Program/Enter
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
66:Fax#/Com-Options
G5,G7,[01],S006,9-55
2.48