Filter
Top Products
Beyond the Basics
Note: No other F-Code box in this machine can have the same sub-address
as the one you enter here.
Note: To erase characters, press
CANCEL
to erase to the left.
To change just one number, press to move the cursor left, or
/
PROGRAM
to move it right. Press
CANCEL
to erase the character.
Then re-enter the number correctly.
11
Press
ENTER
to save the sub-address.
Note: If you entered a sub-address already being used by another F-Code
box, the machine beeps and briefly displays:
The machine now returns you to step 10. Please enter a different
number for your F-Code box’s sub-address.
12
Next, the machine asks for your F-Code box’s password. This is the password
for
ITU
-
T
-compatible F-Code fax transactions. The
LCD
shows:
or
Note: You don’t need to have a password for the F-Code box. However, using
a password will make your F-Code communication much more secure.
If you do not want to enter or change this box’s password, skip to step 14.
13
Use the numeric keypad to enter this box’s
ITU
-
T
-compatible password. This
password can be up to 20 characters in length and include any combination of
numbers and the * and # characters (but no other non-numerical characters).
Here, we’ve entered 135*7#9.
Note: To erase characters, press
CANCEL
to erase to the left.
To change just one character in the password, press to move the
cursor left, or /
PROGRAM
to move it right. Press
CANCEL
to erase the
character. Then re-enter the password correctly.
Note: You cannot change the type of an existing F-Code box. If you’re modi-
fying an existing F-Code box and want to change the box type, you
first must erase the old box, then create a new one.
14
Press
ENTER
to save the password. The
LCD
now shows:
The fax machine is asking which box type you want to assign to this box —
bulletin, security or relay.
Press or /
PROGRAM
until the type of box you want appears.
15
Press
ENTER
.
If you chose Bulletin, go on to step 16.
If you chose Security, skip to step 17.
If you chose Relay, skip to step 20.
If you chose Bulletin:
16
The bulletin box has four additional settings:
• Reception protection (“Rx Protect” on the
LCD
)
• Automatic printing of received documents (“Auto Print”)
• Overwriting documents (“Overwrite Doc.”)
• Erasure of transmitted documents (“Erase Tx Doc.”)
Rx Protect — Reception protection tells this box if it’s okay to receive
documents from remote locations. Callers can then poll these documents.
On: Open this box to receive documents from callers.
Off: Do not open this box to receive documents from callers.
Press or /
PROGRAM
until the mode you want appears.
Then press
ENTER
to save the setting and go on to the next one.
Auto Print — Automatic printing of received documents tells the fax machine
if it should print a document automatically upon receiving it into this box.
Note: This setting is available only when the reception protection setting is
set to off (see above).
On: Print the document automatically when the box receives it.
Off: Print the document manually, when you want to print it.
Press or /
PROGRAM
until the mode you want appears.
Then press
ENTER
to save the setting and go on to the next one.
Auto Print: Off
Program/Enter
Rx Protect: Off
Program/Enter
Box Type: Bulletin
Program/Enter
03:Password
135*7#9_
03:Password
123456789*#_
03:Password
_
03:Enter Sub-Address
Sub-Address In Use
2.37