Filter
Top Products
Beyond the Basics
22
Press
ENTER
. The
LCD
asks if you want to turn the Copy & Fax feature on or
off for this programmable one-touch number.
23
Press /
PROGRAM
until the mode you want appears.
24
Press
ENTER
.
25
The
LCD
now displays the next programmable one-touch key.
If you do not want to enter or change any other key’s programming, press
STOP
.
Your machine returns to standby mode.
If you do want to enter or change this key’s programming, go back to step 4.
If you want to enter or change another key’s programming, go back to step 2.
Programming regular polling
Note: You cannot program continuous polling into a programmable one-touch key.
For more information on continuous polling, see page 2.30.
To program a regular polling operation into a programmable one-touch key:
1
Press /
PROGRAM
,
C
,1,
ENTER
. The
LCD
shows an empty programmable one-
touch number:
Note: If a programmable one-touch number other than 65 appears on the
LCD
, it means that you have already entered a number for 65.
Note: To erase a programmable one-touch key, see page 2.58.
2
Press the key that you want to program or change. Here, we’ve selected 72.
Note: If your previous command for this key was for a polling transmission
and you want to keep this key programmed for a polling transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
3
If you want to select a different programmable one-touch key than the one
that appears on the
LCD
, press that key now.
4
Press
ENTER
. The
LCD
asks for the type of operation you want to program into
the programmable one-touch:
Note: If changing a previously stored command, skip to step 7.
5
Press /
PROGRAM
until “Comm.” appears.
6
Press
ENTER
. The
LCD
now shows either:
or
7
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
Your display shows only 20 characters at a time. To view characters beyond
those 20, press to scroll to the left or /
PROGRAM
to scroll to the right.
Important: Do not press
ENTER
.
Note: To erase characters, press
CANCEL
to erase to the left.
To change just one character in the number, press to move the cur-
sor left, or /
PROGRAM
to move it right. Press
CANCEL
to erase it.
Then re-enter the number correctly.
8
Next, while you can still see the fax number on the
LCD
, press
COM
-
OPTIONS
twice and then press
ENTER
.
9
If you want the polling to begin immediately every time you press the key,
press
ENTER
and skip to step 12.
If you want to delay the polling, press
COM
-
OPTIONS
,
ENTER
.
72:Fax#/Com-Options
9-5550696_
72:Fax#/Com-Options
9-5558743_
72:Fax#/Com-Options
_
72: Type: Comm.
Program/Enter
72: Type: Comm.
Program/Enter
Select Program No.
72:No Number Stored
Select Program No.
65:No Number Stored
66: Copy&Fax: ---
Program/Enter
2.49