Filter
Top Products
Beyond the Basics
Note: Do not enter any characters here. If you do, you can’t program a
batch transmission into this key. If you accidentally enter characters
here, press
CANCEL
as many times as needed to erase all of them
before you go on to step 7.
Note: If this key already holds a batch transmission, skip to step 8.
7
Press
COM
-
OPTIONS
three times and then press
ENTER
. The
LCD
shows:
8
Use the numeric keypad to enter the one-digit identifier for the batch box you
want to assign to this one-touch key. Here, we’ve entered 5:
Note: To change an identifier already entered, press
CANCEL
to erase it.
Then re-enter the correct identifier.
9
Press
ENTER
.
10
The
LCD
asks if you want to program additional settings for this programma-
ble one-touch number.
If you do not want to program additional settings, press
ENTER
and then skip
to step 22.
If you do want to program additional settings, press /
PROGRAM
and
ENTER
.
11
The
LCD
asks which resolution you want to set for this programmable one-
touch number.
12
Press /
PROGRAM
until the mode you want appears.
Note: For any of the following settings, choosing “---” tells the machine to
use its default setting for this one-touch key.
13
Press
ENTER
. The
LCD
asks which contrast mode you want when using this
programmable one-touch number.
14
Press /
PROGRAM
until the mode you want appears.
15
Press
ENTER
. The
LCD
asks if you want the confirmation stamp on or off when
using this programmable one-touch number.
16
Press /
PROGRAM
until the mode you want appears.
17
Press
ENTER
. The
LCD
asks if you want to send a cover page when using this
programmable one-touch number.
18
Press /
PROGRAM
until the mode you want appears.
19
Press
ENTER
. The
LCD
asks if you want the Copy & Fax feature on or off when
using this programmable one-touch number.
20
Press /
PROGRAM
until the mode you want appears.
21
Press
ENTER
.
22
The
LCD
now displays the next programmable one-touch key.
If you do not want to enter or change any other key’s programming, press
STOP
to return your machine to standby mode.
If you do want to enter or change this key’s programming, go back to step 4.
If you want to enter or change another key’s programming, go back to step 2.
67: Copy&Fax: ---
Program/Enter
67: Cover Page: ---
Program/Enter
67: Stamp: ---
Program/Enter
67: Contrast: ---
Program/Enter
67: Primary: ---
Program/Enter
67: Option: Off
Program/Enter
Batch Tx
Enter Box No. 5_
Batch Tx
Enter Box No. _
2.51