Filter
Top Products
Beyond the Basics
To dial a number via an alternative telephone network service
Pick up the optional telephone handset or press
MONITOR
/
CALL
to hear the dial tone.
Press the Soft Key on the control panel, then the
LCD
will show a “!” symbol to indi-
cate the access to the service.
Dial a cost centre code (2 or 3 digits) if you selected this option when ordering
Mercury service. Enter the telephone number on the numeric keypad.
Notes:
• You must enter the full National Code telephone number when dialling tele-
phone numbers via the Mercury network.
• Your fax machine will not display your Mercury
PIN
number when dialling, or
sound it through the monitor speaker, this is a Mercury requirement.
• You can not enter the Soft Key followed by the one-touch or speed-dial key (see
below for more information).
To dial using the one-touch or speed-dial keys
You must instruct your fax machine to access the alternative telephone network
when you store the telephone number into your autodialler. At first, press the
Soft Key that you programmed for access to the alternative telephone network ser-
vice, and then enter the telephone number.
** Tel Mode **
!_
2.34