NETGEAR D7000 Network Router User Manual


 
DescriptionLED
For more information, see Power LED Is Off on page 298.
Internet
Solid white. The modem router detected an Internet connection.
Solid amber. The modem router is not connected to a DSL, cable, or fiber
modem, or the modem router did not detect an Internet connection.
For more information, see Troubleshoot the Internet Connection on page 299.
Blinking white. Data is being transmitted over the Internet connection.
Alternating white and amber. The traffic meter is enabled and the traffic limit
is reached.
Off.The modem router cannot connect to the Internet or the Internet connection
failed.
For more information, see Internet LED Is Off on page 300.
DSL
Solid white. The modem router is connected to a DSL service and the DSL
connection is ready.
Blinking white. The modem router is negotiating the best possible speed on
the DSL line.
Off.The modem router is not connected to a DSL service or a DSL connection
is not established.
2.4 GHz WiFi
Solid white. The 2.4 GHz WiFi radio is operating.
Blinking white. The modem router is sending or receiving WiFi traffic over the
2.4 GHz radio.
Off. The 2.4 GHz WiFi radio is off.
5 GHz WiFi
Solid white. The 5 GHz WiFi radio is operating.
Blinking white. The modem router is sending or receiving WiFi traffic over the
5 GHz radio.
Off. The 5 GHz WiFi radio is off.
USB 3.0 port 1 and USB
3.0 port 2
Solid white. A USB device is connected and is ready.
Blinking white. Data is being transmitted to or from the USB device.
Off. No USB device is connected, or someone clicked the Safely Remove
Hardware button and it is now safe to remove the attached USB device.
The LED color indicates the speed: white for Gigabit Ethernet connections and
amber for 100 Mbps or 10 Mbps Ethernet connections.
Ethernet ports 1–4
Hardware Overview of the Modem Router
14
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000