NETGEAR D7000 Network Router User Manual


 
If the NETGEAR genie automatic setup utility displays, skip to Step 14. If it does not display, do the
following:
a. In the address field of the web browser, enter www.routerlogin.net.
b. When prompted, enter admin for the user name and password for the password.
If the NETGEAR genie automatic setup utility displays, skip to Step 14. If the NETGEAR genie automatic
setup utility still does not display, see Step 13.
13. If the browser cannot display the web page, do the following:
a. Make sure that the computer is connected to one of the four Ethernet LAN ports or over WiFi to
the modem router.
b.
Make sure that the Power LED of the modem router is lit solid white.
c. Make sure that your browser does not cache the previous page by closing and reopening the
browser.
d. Clear the browser cache.
e. If the computer is set to a static (fixed) IP address (this setting is uncommon), either change the
computer to obtain an IP address automatically from the modem router through DHCP, or change
the IP address of the computer to a static IP address in the 192.168.0.2–192.168.0.254 range.
14. Click the Next button.
Install and Access the Modem Router and Its Network
27
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000