Filter
Top Products
DescriptionField
Enter the IP address of the gateway.Gateway IP Address
The IP address of the gateway must be on the same LAN segment as
the modem router.
Enter a number from 1 through 15.Metric
This value represents the number of routers between your network and
the destination. Usually, a setting of 2 or 3 works, but if this is a direct
connection, set it to 1.
10. Click the Apply button.
Your settings are saved. The static route is added to the table on the Static Routes page.
Change a Static Route
You can change an existing static route.
To change a static route:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
6. In the Static Routes table, select the radio button to the left of the route.
7. Click the Edit button.
The page adjusts.
8. Change the settings for the route.
Manage the WAN and LAN Network Settings
230
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000