Filter
Top Products
DescriptionField
•
Enable. NAT is enabled. This is the default setting. Leave this setting if no reason to disable NAT
exists.
•
Disable. NAT is disabled.
Router MAC Address
The Ethernet MAC address that the modem router uses on the Internet port. Some ISPs register the
MAC address of the network interface card in your computer when your account is first opened.They
accept traffic only from the MAC address of that computer.
This feature allows your modem router to use your computer’s MAC address (also called cloning).
Use the default MAC address.Use Default Address
The modem router captures and uses the MAC address of the
computer that you are now using.You must use the one computer
that is registered by the ISP.
Use Computer MAC Address
Enter the MAC address that you want to use. By default, the field
displays the MAC address of the Internet port.
Use This MAC Address
DHCP Options
Enter the vendor class identifier (VCI) string, as indicated by your
ISP.
Vendor Class Identifier String
(option 60)
If your ISP did not provide you with a VCI string, leave this field blank.
Enter the client identifier (client ID) string, as indicated by your ISP.Client Identifier String (option
61)
If your ISP did not provide you with a client ID string, leave this field
blank.
14. Click the Apply button.
Your settings are saved.
15. Click the Test button to test your Internet connection.
Manage the Internet Settings Manually
56
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000