NETGEAR D7000 Network Router User Manual


 
Per Schedule. Use keyword blocking according to a schedule that you set.
For more information, see Set Up a Schedule for Keyword Blocking and Outbound Firewall Rules
on page 154.
Always. Use keyword blocking continuously.
8. Below the Service Table, click the Add button.
9. From the Service Type menu, select User Defined.
10. Specify a new outbound rule as described in the following table.
DescriptionField
Select the protocol (TCP or UDP) that is associated with the service or
application. If you are unsure, select TCP/UDP.
Protocol
Enter the start port for the service or application.Starting Port
If the service or application uses a range of ports, enter the end port for
the range. If the service or application uses a single port, repeat the port
number that you entered in the Starting Port field.
Ending Port
Enter the name of the custom service or application.Service Type/User Defined
11. Specify which devices on your LAN (or LAN users) are affected by the rule, based on their IP addresses:
Only This IP Address. Enter the required address in the fields to apply the rule to a single device
on your LAN.
IP Address Range. Enter the required addresses in the start and end fields to apply the rule to a
range of devices.
All IP Addresses. All computers and devices on your LAN are covered by this rule.
Control Access to the Internet
151
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000