NETGEAR D7000 Network Router User Manual


 
DescriptionField
Any.This is the default setting and allows any computer on the
Internet to use this service.
Single address. Restricts the service to a particular computer.
Select the protocol (TCP or UDP) that is associated with the service or
application.
Service Type
Enter the number of the outbound traffic port that must open the inbound
ports.
Triggering Port
Required Inbound Connection
Select the protocol (TCP or UDP) that is associated with the inbound
connection.
Service Type
If you are unsure, select TCP/UDP.
Enter the start port number for the inbound connection.Starting Port
Enter the end port number for the inbound connection.Ending Port
9. Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table on the Port
Forwarding / Port Triggering page.
Change a Port Triggering Rule
You can change an existing port triggering rule.
To change a port triggering rule:
1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
Manage Port Forwarding and Port Triggering
286
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000