Filter
Top Products
System Settings
172
ReadyNAS OS 6.1
If you do not want an event to generate an alert, clear its check box.
Dimmed events (Disk Failure, Volume, Power, and UPS) always generate email alerts.
3. In the Other
Alert Settings section, select the check box next to each response that you want
ReadyNAS system to execute in case of emergency:
• Shut down the system when a disk fails or no longer responds. When this check
box is selected, if a disk fails, your ReadyNAS system powers of
f.
• Shut down the system when disk temperature exceeds safe levels. When this
check box is selected, if disk temperature exceeds safe levels, your ReadyNAS
system powers of
f.
4. Click the Apply button under the Alerts heading.
Your changes are saved.
Configure the Host Name
The ReadyNAS uses a host name to advertise itself on the network. When you review the
network using ReadyCLOUD, a computer, or any other interface, you can recognize the
ReadyNAS by its host name.
The default host name is nas-xx-xx-xx, where xx-xx-xx is the last 6 bytes of the system’
s
primary MAC address. You can change the host name to one that is easier to remember and
recognize.
To change the host name:
1. Select System > Overview > Device.
2. Click the gear icon (
) to the right of the Name field.