Filter
Top Products
Operation
3-613160-A2-GB22-10 December 1996
3. From
the Control screen, press
to scroll
ClrUsr on the screen.
F1
Control:
Call Rel LED
F2
F3
4.
Press F3 to select ClrUsr
.
F1
Control:
Rel LED ClrUsr
F2
F3
5. From
the Clear Registers screen, press F1 to clear
the User registers or press F2 if you have decided
not to clear the User registers.
F1
Clear Regs?
Yes No
F2
F3
If
you selected Y
es, the User performance
registers are cleared. All accumulators are reset to
zero and all status registers are cleared, and the
current interval timer, the number of valid
intervals count and the total 24-hour counts are
reset to zero. The Command Complete screen then
appears.
F1
Clear Registers:
Command Complete
F2
F3
If
you selected No, the Ctrl screen reappears and
no registers are reset.
Differ
ences Using the Async T
erminal: T
o reset the
User registers, select
Clear User Performance Registers
from the main/control menu (see Figure 3-39). The system
prompts Ar
e Y
ou Sure? so you can verify your intention
to reset the registers. Respond with
Ye s to proceed with
the Clear command.
Controlling the DSU/CSU
The Control branch of the front panel menu tree allows
you to control various aspects of the user interface and
integral modem. Figure 3-38 shows the Control branch.
Figure 3-38. Control Branch
Differences
Using the Async T
erminal: Figure 3-39
shows the Control branch using the async terminal.
Figure 3-39. Control Branch for the
Async Terminal