Filter
Top Products
Configuration Options
C-113160-A2-GB22-10 December 1996
Table C-5
(2 of 2)
Data Port Channel Configuration Options
Start At: Clear
Next Clear N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 ... N24 Prev
OR
Start At: Clear
Next Clear D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 ... D24 Prev
Data Port Channel Allocation (appears for the block and ACAMI methods only). Designates the starting DS0 channel
(N1–N24 for the Network T1 interface and D1–D24 for the DTE Drop/Insert T1 interface).
Press the left or right arrow key to scroll through the available selections. Available selections are only those DS0
channels that provide enough bandwidth (based on the configured data rate) to be used as a starting channel number.
Select the desired starting channel number by pressing the Function key under that number. When you make the
selection, the DSU/CSU allocates the correct amount of DS0 channels to support the data rate currently configured for
the port.
Clear – Deallocates all DS0 channels for this port from the T1 interface specified by the channel allocation destination
option.
NOTE: This configuration option does not appear if the individual channel allocation method (Chan) is selected using
the Assign By configuration option.
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 ... N24
Next – – – – – – – – – – – – ... Prev
OR
D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 ... D24
Next – – – – – – – – – – – -– ... Prev
Data Port Channel Allocation (appears for the Individual Channel method only). Designates the DS0 channel to allocate
to this port (N1–N24 for the Network T1 interface and D1–D24 for the DTE Drop/Insert T1 interface).
Line 1 displays the 24 channels for the Network T1 interface or DTE Drop/Insert T1 interface. Line 2 displays what is
allocated to the DS0 channel indicated in Line 1. Possible values for Line 2 are:
Value
Meaning
– This DS0 channel not allocated. This value may be modified from this screen.
Prt
n
This DS0 channel is allocated to port
n,
where
n
is a number from 1 to 4. You can modify this value from
this screen for this port only.
N
n
This DS0 channel is allocated to Network T1 Interface DS0 channel
n
where
n,
is a number from 1 to 24.
You cannot modify this value from this screen.
D
n
This DS0 channel is allocated to DTE Drop/Insert T1 Interface DS0 channel
n,
where
n
is a number from 1
to 24. You can modify this value from this screen.
Select the channel by pressing the Function key under that number. To unallocate a port, press the Function key under
that port number. Pressing the Function key under channels assigned to other ports has no effect.
NOTE: The DSU/CSU automatically derives the data rate for the port from the number of DS0 channels allocated.