Filter
Top Products
Installation
2-173160-A2-GB22-10 December 1996
Enabling/Disabling the Front
Panel
You can enable or disable the display of data through
the front panel. This feature is useful for ensuring that
other users do not inadvertently change the device’s
configuration options while you are using the PC or async
terminal interface. The factory default is enable.
NOTE
If you disable the front panel, be
sure not to alter the options for
using the PC or Async terminal
interface. If this happens, you lose
the ability to communicate with
the device. You will need to
contact your service
representative.
To enable or disable the front panel:
1. Press F3 to select Cnfig from the top-level menu
screen.
F1
DS
U E
SF
Stat Test Cnfig
F2
F3
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key
. Use the scroll keys, if necessary
.
F1
Load from:
Activ Cust Fact1
F2
F3
3. Press F1 to select Edit.
F1
Choose Funct:
Edit Save
F2
F3
4. Press the key from the Edit screen to display
the User selection.
F1
Edit:
DTE Port NET
F2
F3
5.
Press F3 to select User
.
F1
Edit:
Chan Gen User
F2
F3
6. Press the F1 (Next) key until the front panel
access configuration option appears.
F1
Self-Test:Enab
Next Enab Disab
F2
F3
7. Press F2 to enable the front panel or F3 to disable
the front panel.
F1
FP
A
ccess:
Next Enab Disab
F3
F2