Filter
Top Products
Operation
3-433160-A2-GB22-10 December 1996
3. Press F1 to select Edit.
F1
Choose Funct:
Edit Save
F2
F3
4. Press the key from the Edit screen to display
the Chan selection.
F1
Edit:
DTE Port NET
F2
F3
5.
Press F3 to select Chan.
F1
Edit:DTE
Port NET Chan
F2
F3
6.
From the Channel Config screen, press the
key to scroll the ports onto the screen.
F1
Channel Config:
Dsply Clear DTE
F2
F3
7. Select
the desired port by pressing its
corresponding Function key.
F1
Channel Config:
Prt1 Prt2 Prt3
F2
F3
8. The configuration option for the data port
channel allocation destination appears on the
screen. Press F2 (NET) to assign this port to the
Network T1 interface, or F3 (DTE) to assign this
port to the DSX-1 Drop/Insert T1 interface.
F1
Assign To:NET
Next NET DTE
F2
F3
9. Press F1 (Next) to display the appropriate
configuration options on the screen. Use one of
the following examples, depending on whether
you are assigning by block, ACAMI, or i.
Differ
ences Using the Async T
erminal: T
o allocate data
ports, choose a port selection from the main/
configuration/edit/channel menu. From these screens, you
can specify whether the assignment is by block, ACAMI,
or individual port.
Block Channel Assignment Method Example
To
assign by the block method,
1. The Assign By configuration option screen
appears after you select a port. T
o assign by block,
press F2 (Block).
F1
Assign
B
y:Block
Next Bloc
k A
CAMI
F2
F3
2. Press F1 (Next) to display the next configuration
option (Port Rate).
F1
Assign
B
y:
Next Bloc
k A
CAMI
F2
F3