Patton electronic 29XX Server User Manual


 
Dial In User Statistics window 100
Access Server Administrators’ Reference Guide 7 • Dial In
Number Called (diactNumberDialed)
The phone number that was used to dial into the access server.
Number Called From (diactCallingPhone)
The user’s phone number—this is a caller ID feature.
Data
This portion of the Dial In User Statistics window (see figure 40 on page 99) describes the amount of PPP data
sent and received by this user.
Octets Sent (diactSentOctets)
The number of octets (bytes) sent during this call.
Octets Received (diActReceivedOctets)
The number of octets (bytes) received during this call.
Packets Sent (diactSentDataFrames)
The number of packets sent to the user during this call. Version 6 nomenclature for a packet is Ipv6 header
plus payload.
Packets Received (diactReceivedDataFrames)
The number of packets received by the user during this call. Version 6 nomenclature for a packet is Ipv6 header
plus payload.
Bad Packets (diactErrorFrames)
Number of bad received packets received during this call. Bad packets are those that failed CRC error checks.
Physical Layer
This portion of the Dial In User Statistics window (see figure 40 on page 99) contains statistics about the
modem connection. It includes modulation, levels, and other modem-related statistics that are helpful when
troubleshooting modem problems. This section covers only modem-type statistics, not ISDN connections.
Connection Modulation (diactModulation)
The modulation type of the modem link (for example, V.34). The modem link can have these modulation or
data types:
unknown(0)
v21(1)—V.21 modulation
v22(2)—V.22 modulation
v32(3)—V.32 modulation
v34(4)—V.34 modulation
k56(5)—K56 Flex modulation
x2(6)—X.2 modulation