Filter
Top Products
Dial Out Locations Window 118
Access Server Administrators’ Reference Guide 8 • Dial Out
Add Location
Locations are added to the table using the following form at the bottom of the locations window.
Figure 46. Add Location Form.
Id (locationId)
The unique identifier for this location. There are a maximum of 120 locations so the range is from 1 to 120.
Location Name (locationName)
A name can be given to each location. Maximum size is 12 characters.
User Name (locationUserName)
This is the username to log into the remote location. Maximum size is 32 characters.
Password (locationPassword)
This is the password to log into the remote location. Maximum size is 32 characters.
Phone Number (locationPhoneNumber)
This is the phone number to dial to reach the remote location. Maximum size is 80 characters.
Destination IP (locationDestinationIP)
This is the IP address of the remote location. This field is required for Dial-On-Demand calls. If this field is left
to 0.0.0.0, the IP address will be negotiated.
Destination NetMask (locationDestinationNet)
This is the net mask of the remote location.