Filter
Top Products
An example section of dialout 132
Access Server Administrators’ Reference Guide 8 • Dial Out
Data Compression Protocol (doactCompression)
The modem data compression technique used during this call.
• None—No compression.
• V42bis—Compression is running.
• Stac—Not currently implemented.
Modulation Symbol Rate (doactSymbolRate)
The modulation symbol rate during the call. This is used only when in V.34 and above modulations.
Locally Initiated Renegotiated (doactLocalRenegotiates)
The number of times the local modem has initiated a modem speed renegotiate.
Locally Initiated Retrains (doactLocalRetrains)
The number of times the local modem has initiated a modem carrier retrain.
Remote Initiated Renegotiates (doactRemoteRenegotiates)
The number of times the remote modem has initiated a modem speed renegotiate.
Remote Initiated Retrains (doactRemoteRetrains)
The number of times the remote modem has initiated a modem carrier retrain.
An example section of dialout
1. Display the Dial-Out main window.
—Click on the
Modify
link.
— Set the TCP port to 24 or some other unused port.
—Set
TCP Type
to telnet.
—Set
Login Technique
to Text.
—Click on
Submit Query
.
2. Display the
Authentication
main window. Scroll down until
Static User Identification
is displayed (see
figure 18 on page 41) then click on
Static User Identification
.
— Refer to section “Adding Static Users” on page 41 to create a static user with dialOut as the service.
—Click on
Submit Query
.
3. Telnet x.x.x.x aa
where x.x.x.x is the IP of your remote access server and
aa is the port Dial-Out is listening to for connections
4. Log in as the user you made in the static database in step 2.
5. At the
OK
prompt, type ATDT then a phone number to place an analog call or ATDI then a phone num-
ber to digital 64k ISDN call.