Filter
Top Products
Modify Static User 43
Access Server Administrators’ Reference Guide 5 • Authentication
Figure 19. Static User settings window
Service IP (suServiceIP)
This is the IP of the RLogin or Telnet host, or the static IP address assigned to the user. This is determined by
the option selected in
Service
(see “Service (suService)” on page 41).
Service Port (suServicePort)
This is the port number to connect to the service host. If the number is 0, the access server will use the default
values for Telnet (port number 23) and RLogin (port number 513).
Note
After you have submitted all changes, click on the
HOME
link in the
Config-
uration Menu
. Once there, click on the
Record Current Configuration
but-
ton (located under
Immediate Actions
) to save the changes to FLASH
memory on the access server.
All changes made to the running configuration must be saved to FLASH
memory. Failure to do so will cause all configuration information to be lost
the next time the access server is re-booted.
Service Mask (suServiceMask)
This parameter defines the IP mask of the user.
Filter ID (suFilterId)
This is the ID of the filter assigned to the static user. A filter controls packets that can be sent or received by the
dial-in user to which it is applied. Only one filter can be assigned to a user defined in the static user authentica
-
tion database.
Note
Explicitly assigning a filter to a static user will keep default dial-in filters
from being applied.