Filter
Top Products
Manage DNIS Window 82
Access Server Administrators’ Reference Guide 7 • Dial In
• chap(4)—This setting assumes that all calls will be PPP users. No username or password prompt will be dis-
played. The system will go directly to PPP processing. The dial-up user must be configured on his computer
for CHAP authentication.
Note
If the user trying to connect to the DMA is not configured for CHAP he will
be disconnected.
• chapORpap(5)—This setting assumes that all calls will be PPP users. No username or password prompt
will be displayed. The system will go directly to PPP processing. The dial-up user must be configured for
PAP or CHAP authentication. The DMA will always request CHAP authentication first. Therefore, if a
user can negotiate either CHAP or PAP, CHAP authentication will be performed.
• textORchapORpap(6)—This setting enables clear text logins or PPP calls using PAP or CHAP
authentication.
• MschapV1 - This setting assumes that all calls will be PPP users. No username or password prompt will be
displayed. The system will go directly to PPP processing. The dial-up user must be configured on his com
-
puter for MS-CHAP V1 authentication
• MschapV2 - This setting assumes that all calls will be PPP users. No username or password prompt will be
displayed. The system will go directly to PPP processing. The dial-up user must be configured on his com
-
puter for MS-CHAP V2 authentication
• MschapV1ORV2 - This setting assumes that all calls will be PPP users. No username or password prompt
will be displayed. The system will go directly to PPP processing. The dial-up user must be configured on his
computer for MS-CHAP V1 OR V2 authentication
DOVBS (dnisProfileDOVBS)
With Data over Voice Bearer Service (DOVBS) the remote end initiates a voice call that is to be terminated dig-
itally. A voice call carrying data is indicated by the presence of 3.1khz or speech in the bearer capability infor-
mation element of the SETUP message.
• disable(0) —DOVBS is not supported
• dovbs56(1)—The voice call will be terminated as a 56k digital call.
• dovbs64(2)—The voice call will be terminated as a 64k digital call.
Service Port (dnisProfileServicePort)
The TCP port on the remote machine listening for TCP raw or telnet connections
Service IP (dnisProfileServiceIP)
The IP address of the remote machine that the dial-in customer is to be redirected.
Telnet UserId (dnisProfileTelnetUserId)
Specifies the ID string that the device will submit during a Telnet session.
Telnet Mode (dnisProfileTelnetMode)
Specifies the mode–ASCII or Binary– that the device will use to start a Telnet session.