Patton electronic 6511RC Switch User Manual


 
1 • Introduction Model 6511RC User Manual
28 Hardware overview
Table 4. Rear-panel LED indicators
TEST MODE Green On solid One or more Ethernet ports or the STM-1 port is in test mode.
Flashing One or more Ethernet ports or the STM-1 port is in test mode and errors have been
received.
Off None of the ports is operating in test mode.
WAN Green On solid Indicates the STM-1 port is activated, synched, and operating normally.
Flashing Indicates that the STM-1 port is detecting the SDH network, but is unable to synchro-
nize with it.
Off Indicates rear blade not present or STM-1 port is not configured
ENET(SWITCH) Green On solid Indicates there is Ethernet frame activity on at least one of the eight PICMG 2.16 connec-
tions to other blades on the PSB bus.
Off
No Ethernet frame activity detected on the PICMG 2.16 bus.
ENET(REAR) Green On Indicates Ethernet frame activity on one or both of the 10/100/1000 Ethernet ports
Off There is NO Ethernet frame activity on either of the 10/100/1000 Ethernet ports
ON LINE On Reserved for future use
Off Reserved for future use
10/100 ENET Green On Ethernet Link is established
Integrated LEDs
Off No Ethernet link is established
on RJ-45
Yellow On Flashes to indicates Ethernet frame activity on this port
Connector
Off Indicates no Etherent frame activity on this port
READY Blue On Card ready for removal from cPCI chassis.
Off Card not ready for removal from cPCI chassis.
LED Color Status Meaning
ALARM Red On solid A minor alarm condition has been detected.
Flashing A major alarm condition has been detected
Off The Model 6511RC is operating normally.
WAN Green On solid Indicates the STM-1 port is activated, synched, and operating normally.
Flashing Indicates that the STM-1 port is detecting the SDH network, but is unable to synchro-
nize with it.
Off Indicates rear blade not present or STM-1 port is not configured
ENET 1 Green On Ethernet Link is established
Integrated LEDs
Off No Ethernet link is established
on RJ-45
Yellow On Flashes to indicates Ethernet frame activity on this port
Connector
Off Indicates no Etherent frame activity on this port
ENET 2
Green On Ethernet Link is established
Integrated LEDs
Off No Ethernet link is established
on RJ-45
On Flashes to indicates Ethernet frame activity on this port
Connector
Off Indicates no Etherent frame activity on this port
Ready
Blue On Card ready for removal from cPCI chassis.
Off Card not ready for removal from cPCI chassis.
Table 3. Front-panel LED indicators (Continued)
LED Color Status Meaning