Filter
Top Products
Using a browser to complete Model 6511RC configuration 65
Model 6511RC User Manual 3 • Configuring the Matrix Switch for operation
The following notation should be used for assigning timeslots:
– dash: (-), e.g., 1 – 4
– comma: (,), e.g., 1,4,9
– combo: 1-2,3,6-7
At this point you have defined the SDH channel composed of a selected E1 signal stream and a set of
timeslots within that E1. Now you must define the mid-plane channel to be correlated with the
SDH channel.
6. In the first row, labeled to H110(5), for the H.110 number, select the appropriate H.110 port number
from the drop-down menu
7. In the first row, labeled toH110(5), for H.110 slots, enter the timeslot numbers you wish to map to the
H.110 bus (from the E1).
8. In the second row, labeled fromH110(6), select the appropriate H.110 port number from the drop-
down menu
9. In the second row, labeled fromH110(6), for H.110 slots, enter the timeslot numbers you wish to map
from the H.110 bus (to the E1).
10. Click the Define button. The new mapping will appear at the bottom of the page in the Defined
Mappings table.
11. Examine the Defined Mappings table to verify that your new mapping appears and was correctly entered
and recorded.
Examples for configuring DS0 mappings.
Three examples are provided:
• Example 1—For E1 port number 1:
- map all 32 timeslots of the received E1 signal to H.110 port 1 timeslots 1-32
- map all 32 timeslots of the transmitted E1 signal from H.110 port 1 timeslots 33-64
• Example 2—For E1 port number 2:
- map all 32 timeslots of the received E1 signal to H.110 port 1 timeslots 65-96
- map all 32 timeslots of the transmitted E1 signal from H.110 port 1 timeslots 97-128
• Example 3—For E1 port number 7
- map all 32 timeslots of the E1 received signal to H.110 port 4 timeslots 1-32
- map all 32 timeslots of the E1 transmitted signal from H.110 port 4 timeslots 33-64