Patton electronic 6511RC Switch User Manual


 
Using a browser to complete Model 6511RC configuration 69
Model 6511RC User Manual 3 • Configuring the Matrix Switch for operation
Defining DS0 mappings using TU format
Experienced SDH engineers with a solid understanding of STM-1 architecture will most likely prefer to use
TU format to define DS0 mappings. To define a DS0 mapping using TU format, do the following:
1. On the 6511RC Configuration Menu (see figure 27 on page 48), click the DS0 Mapping hyperlink to dis-
play the DS0 Mapping Overview page (see figure 54).
2. For the Display Option parameter, verify that displayLongForm(0) is selected from the drop-down menu.
3. For the E1 Input Format parameter, select tuFormat(0) from the dropdown menu.
4. Click the Modify button to save changes.
Figure 54. DS0 Mapping Overview page with TU format selected