Patton electronic 6511RC Switch User Manual


 
3 • Configuring the Matrix Switch for operation Model 6511RC User Manual
72 Using a browser to complete Model 6511RC configuration
Examples for configuring DS0 mappings.
Three examples are provided:
Example 1—For the E1 located in TUG-3 or AU-3 number 1, TUG-2 number 1, TU-12 number 1
(Matrix Switch E1 port number 1):
- map all 32 timeslots of the received E1 signal to H.110 port 1 timeslots 1-32
- map all 32 timeslots of the transmitted E1 signal from H.110 port 1 timeslots 33-64
Example 2—For the E1 located in TUG-3 or AU-3 number 2, TUG-2 number 1, TU-12 number 1
(Matrix Switch E1 port number 2):
- map all 32 timeslots of the received E1 signal to H.110 port 1 timeslots 65-96
- map all 32 timeslots of the transmitted E1 signal from H.110 port 1 timeslots 97-128
Example 3—For the E1 located in TUG-3 or AU-3 number 1, TUG-2 number 1, TU-12 number 3
(Matrix Switch E1 port number 7)
- map all 32 timeslots of the E1 received signal to H.110 port 4 timeslots 1-32
- map all 32 timeslots of the E1 transmitted signal from H.110 port 4 timeslots 33-64
Example 1
Map TUG-3 or AU-3 no. 1, TUG-2 no. 1, TU-12 no. 1 received, timeslots 1-32 to H.110 Port 1 timeslots 1-32.
Map TUG-3 or AU-3 no. 1, TUG-2 no. 1, TU-12 no. 1 transmitted, timeslots 1-32 from H.110 Port
1 timeslots 33-64.
Solution:
1. For the value of the first parameter under SDH Channel, select TUG3-1(1) or AU3-1(1) from the drop-
down menu.
2. For the value of TUG-2 select TUG2-1(1) from the drop-down menu.
3.
For the value of TU-12 select TU12-1(1) from the drop-down menu.
4. For the value of E1 Slots, enter 1-32 in the text box.
5. For toH110(5), under H.110 Number, select port1(1) from the drop-down menu.
6. For toH110(5), under H.110 slots, enter 1-32 in the text box.
7. For fromH110(5), under H.110 Number, select port1(1) from the drop-down menu.
8. For fromH110(5), under H.110 slots, enter 33-64 in the text box.
9. Click the
Define
button.
10. Verify that your new mapping appears in the Defined Mappings table.
11. Examine the new mapping to ensure it was entered and recorded correctly.
You have completed the DS0 mapping procedure for example 1.