Polycom MGC-50/MGC-100 Network Router User Manual


 
Chapter 2 - Hardware Installation
2-38
11. Click OK.
12. Exit the MGC Manager and switch OFF the MCU.
13. Disconnect the MCU from the cross-over cable.
14. Connect the MCU to your site’s network.
15. Switch ON the MCU.
a. Right-click the MCU icon, and then click Properties.
Table 2-2: IP Configuration Options
Option Description
IP Address The system displays the currently defined IP
address. Enter the IP address allocated to the
MCU by the network administrator.
Subnet Mask Enter the Subnet Mask of the MCU.
Default Gateway Enter the IP Address of the default gateway/
router.