Filter
Top Products
CHAPTER 9: DEVICE MANAGEMENT 97
Name the Power Strip (Port Page for Power Strips)
This Port page opens when you select a port from the Port Configuration page that is connected to
a Raritan remote power strip. The Type and the Name fields are pre-populated; please note that
the (CIM) Type cannot be changed. The following information is displayed for each outlet in the
power strip: outlet Number, Name, and Port Association.
Use this page to name the power strip and its outlets; all names can be up to 32 alphanumeric
characters and can include
special characters.
Figure 67: Port Page (power strips)
Note: When a power strip is associated to a target server (port), the outlet name is replaced by
the target server name (even if you assigned another name to the outlet).
To name the power strip (and outlets):
Note: CommandCenter Service Gateway does not recognize power strip names containing spaces.
1. Change the Name of the power strip to something you will remember.
2. Change the (Outlet) Name if desired. (Outlet names default to Outlet #.)
3. Click OK.
To cancel without saving changes:
Click the Cancel button.
Link to Port Page
for this port.