Filter
Top Products
98 DOMINION KX II USER GUIDE
Associate Target Servers to Outlets (Port Page)
This Port page opens when you select a port from the Port Configuration page that is connected to
a target server. From this page, you can make power associations, change the Port Name to
something more descriptive, and update target server settings if you are using the
D2CIM-VUSB
CIM. The (CIM) Type and the (Port) Name fields are pre-populated; please note that the CIM
type cannot be changed.
A server can have up to four power plugs and you can associate a different power strip with each.
From this page, you can define those associations so that you can power on, power off, and power
cycle the server from the Port Access page.
To use this feature, you will need:
• Raritan remote power strip(s)
• Power CIMs (D2CIM-PWR)
Figure 68: Port Page (KVM ports)
To make power associations (associate power strip outlets to target servers):
Note: When a power strip is associated to a target server (port), the outlet name is replaced by
the target server name (even if you assigned another name to the outlet).
1. Select the power strip from the Power Strip Name drop-down list.
2. For that power strip, select the outlet from the Outlet Name drop-down list.
3. Repeat steps 1 and 2 for all desired power associations.
4. Click OK. A confirmation message is displayed.