Filter
Top Products
56 DOMINION KX II USER GUIDE
Standard
This is the standard mouse synchronization algorithm using relative mouse positions. Standard
mouse mode requires that acceleration is disabled and other mouse parameters are set correctly in
order for the client and server mouse to stay synchronized. Standard mouse mode is the default.
To enter standard mouse mode:
Select Mouse > Standard
Intelligent
In Intelligent mouse mode, the Dominion KX II can detect the target mouse settings and
synchronize the mouse pointers accordingly, allowing mouse acceleration on the target. In this
mode, the mouse cursor does a “dance” in the top left corner of the screen and calculates the
acceleration. For this mode to work properly, certain conditions must be met.
For additional information on Intelligent Mouse mode, refer to the Raritan Multi-Platform Client
User Guide (Appendix B: Conditions for Intelligent Mouse Synchronization) available on
Raritan’s Website
http://www.raritan.com/support/productdocumentation, or on the Raritan User
Manuals & Quick Setup Guides CD ROM included with your Dominion KX II shipment.
To enter intelligent mouse mode:
Select Mouse > Intelligent
Absolute
Note: Absolute Mouse Synchronization is available for use with the Virtual Media-enabled USB
CIM (D2CIM-VUSB) only.
In this mode, absolute coordinates are used to keep the client and target pointers in sync, even
when the target mouse is set to a different acceleration or speed. This mode is supported on
servers with USB ports; the mouse moves to the exact location on the target server.
To enter absolute mouse mode:
Select Mouse > Absolute
Virtual Media
Refer to the chapter on Virtual Media for complete information about setting up and using virtual
media.