Filter
Top Products
20 DOMINION KX II USER GUIDE
Naming Target Servers
To name the target servers:
1. Connect all of the target servers if you have not already done so (as described in
Step 3:
Connect the Equipment, Target Server Ports).
2. Using the KX II Local Console, select Device Settings > Port Configuration. The Port
Configuration page opens:
Figure 9: Port Configuration
3. Click on the Port Name of the target server you want to rename. The Port Page opens.
4. Assign a name to identify the server connected to that port. The name can be up to 32
characters; alphanumeric and
special characters are allowed.
5. Click OK.
Specifying Power Supply Auto-detection
The Dominion KX II provides dual power supplies, and can automatically detect and provide
notification regarding the status of these power supplies. Proper configuration ensures that the
Dominion KX II sends the appropriate notifications should a power supply fail. The Power
Supply Setup page is configured to automatically detect both power supplies; use this page to
disable automatic detection of the power supply not
in use.
To disable power supply auto-detection for the power supply not in use:
1. Using the KX II Local Console, select Device Settings > Power Supply Setup. The Power
Supply Setup page opens.
2. Clear auto-detection for the power supply that you are not using.
For more information, refer to
Power Supply Setup Page.