Raritan Engineering DOMINION KXII Switch User Manual


 
CHAPTER 3: INSTALLATION AND CONFIGURATION 9
Chapter 3: Installation and Configuration
Overview
This section provides a brief overview of the installation process. Each step is further detailed in
the remaining sections of this chapter.
To install and configure Dominion KX II:
1. Configure the target servers.
2. Configure the network firewall settings.
3. Connect the equipment.
4. Configure the Dominion KX II unit.
Step 1: Configure Target Servers
Target servers are the computers that will be accessed and controlled via the Dominion KX II.
Before installing Dominion KX II, configure all target servers to ensure optimum performance.
This configuration applies only to target servers, not to the client workstations (remote PCs) used
to access Dominion KX II remotely. Refer to
Chapter 1: Introduction, Terminology for additional
information.
To configure the target servers:
Check the video resolution.
Check the desktop background.
Adjust the mouse settings.
Perform OS-specific mouse and video configuration.
Video Resolution
Ensure that each target server’s video resolution and refresh rate are supported by Dominion KX
II and that the signal is non-interlaced.
Supported Video Resolutions
Dominion KX II supports these resolutions:
640x350 @70 Hz 720x400 @85 Hz 1024x768 @90 Hz
640x350 @85 Hz 800x600 @56 Hz 1024x768 @100 Hz
640x400 @56 Hz 800x600 @60 Hz 1152x864 @60 Hz
640x400 @84 Hz 800x600 @70 Hz 1152x864 @70 Hz
640x400 @85 Hz 800x600 @72 Hz 1152x864 @75 Hz
640x480 @60 Hz 800x600 @75 Hz 1152x864 @85 Hz
640x480 @66.6 Hz 800x600 @85 Hz 1152x870 @75.1 Hz
640x480 @72 Hz 800x600 @90 Hz 1152x900 @66 Hz
640x480 @75 Hz 800x600 @100 Hz 1152x900 @76 Hz
640x480 @85 Hz 832x624 @75.1 Hz 1280x960 @60 Hz
640x480 @90 Hz 1024x768 @60 Hz 1280x960 @85 Hz
640x480 @100 Hz 1024x768 @70 Hz 1280x1024 @60 Hz
640x480 @120 Hz 1024x768 @72 Hz 1280x1024 @75 Hz
720x400 @70 Hz 1024x768 @75 Hz 1280x1024 @85 Hz
720x400 @84 Hz 1024x768 @85 Hz 1600x1200 @60 Hz
Note: Composite Sync and Sync-on-Green video require an additional adapter.