Filter
Top Products
Chapter 6: User Management
101
Setting Port Permissions
For each server port, you can specify the access type the group has, as
well as the type of port access to the virtual media and the power control.
Please note that the default setting for all permissions is Deny.
Port Access
Option Description
Deny Denied access completely
View View the video (but not interact with) the connected
target server
Control Control the connected target server. Control must be
assigned to the group if VM and power control access
will also be granted.
VM access
Option Description
Deny Virtual media permission is denied altogether for the
port
Read-Only Virtual media access is limited to read access only
Read-Write Complete access (read, write) to virtual media
Power control access
Option Description
Deny Deny power control to the target server
Access Full permission to power control on a target server
For blade chassis, the port access permission will control access to the
URLs that have been configured for that blade chassis. The options are
Deny or Control. In addition, each blade housed within the chassis has
its own independent Port Permissions setting.
Group-Based IP ACL (Access Control List)
Important: Exercise caution when using group-based IP access
control. It is possible to be locked out of your Dominion KX II if your
IP address is within a range that has been denied access.