Filter
Top Products
Chapter 7: Device Management
138
Port Type
Port type Description
DCIM Dominion CIM
Not Available No CIM connected
PCIM Paragon CIM
PowerStrip Power CIM
VM Virtual Media CIM (D2CIM-VUSB and
D2CIM-DVUSB)
Blade Chassis Blade chassis and the blades associated
with that chassis (displayed in a
hierarchical order)
2. Click the Port Name for the port you want to edit.
For KVM ports, the Port page is opened. From this page, you can
name the ports and create power associations.
For power strips, the Port page for power strips is opened. From
this page, you can name the power strips and their outlets. name
the power strips and their outlets.
Configuring Standard Target Servers
To name the target servers:
1. Connect all of the target servers if you have not already done so.
See Step 3: Connect the Equipment (on page 25) for a description
of conn
ectin
g the equipment.
2. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
3. Click the Port Name of the target server you want to rename. The
Port Page opens.
4. Assign a name to identify the server connected to that port. The
name can be up to 32 characters, and alphanumeric and special
characters are allowed.
5. Click OK.
Configuring Powerstrip Targets (Non-PX)
The Dominion KX II allows you to connect powerstrips to Dominion KX II
ports and configure the powerstrips from the Port page. Note that this is
different then configuring PX powerstrip outlets. For information on
configuring PX powerstrip outlets, see Powerstrip Outlet Control (on
page 174).