Filter
Top Products
Appendix C: Informational Notes
273
Virtual Media
Virtual Media Not Refreshed After Files Added
After a virtual media drive has been mounted, if you add a file(s) to that
drive, those files may not be immediately visible on the target server.
Disconnect and then reconnect the virtual media connection.
Target BIOS Boot Time with Virtual Media
The BIOS for certain targets may take longer to boot if media is mounted
virtually at the target.
To shorten the boot time:
1. Close the Virtual KVM Client to completely release the virtual media
drives.
2. Restart the target.
CC-SG
Virtual KVM Client Version Not Known from CC-SG Proxy Mode
When the Virtual KVM Client is launched from CommandCenter Secure
Gateway (CC-SG) in proxy mode, the Virtual KVM Client version is
unknown. In the About Raritan Virtual KVM Client dialog, the version is
displayed as “Version Unknown”.
Single Mouse Mode - Connecting to a Dominion KX II Target Under
CC-SG Control Via VKC Using Firefox
When using Firefox to connect to a Dominion KX II target under CC-SG
control using DCIM-PS2 or DCIM-USBG2, if you change to Single
Mouse Mode in the Virtual KVM Client, the VKC window will no longer be
the focus window and the mouse will not respond. If this occurs, left click
on the mouse or press Alt+Tab to return the focus to the VKC window.
MPC and VKC Connection Settings
When accessing Dominion KX II targets via CC-SG, changes made to
connection properties are not saved on clients running MPC or VKC.
Proxy Mode and MPC
If you are using Dominion KX II in a CC-SG configuration, do not use the
CC-SG proxy mode if you are planning to use the Multi-Platform Client
(MPC).