Filter
Top Products
Appendix A: Specifications
251
Port Description
HTTP, Port 80 All requests received by the Dominion KX II via HTTP (port 80) are
automatically forwarded to HTTPS for complete security. The Dominion
KX II responds to Port 80 for user convenience, relieving users from
having to explicitly type in the URL field to access the Dominion KX II,
while still preserving complete security.
HTTPS, Port 443 This port is used for multiple purposes, including the web server for the
HTML client, the download of client software (MPC/KVC) onto the
client's host, and the transfer of KVM and virtual media data streams to
the client.
Dominion KX II
(Raritan
KVM-over-IP)
Protocol,
Configurable Port
5000
This port is used to discover other Dominion devices and for
communication between Raritan devices and systems, including
CC-SG. By default, this is set to Port 5000, but you may configure it to
use any TCP port not currently in use. For details on how to configure
this setting, see Network Settings.
SNTP (Time Server)
on Configurable
UDP Port 123
The Dominion KX II offers the optional capability to synchronize its
internal clock to a central time server. This function requires the use of
UDP Port 123 (the standard for SNTP), but can also be configured to
use any port of your designation. Optional
LDAP/LDAPS on
Configurable Ports
389 or 636
If the Dominion KX II is configured to remotely authenticate user logins
via the LDAP/LDAPS protocol, ports 389 or 636 will be used, but the
system can also be configured to use any port of your designation.
Optional
RADIUS on
Configurable Port
1812
If the Dominion KX II is configured to remotely authenticate user logins
via the RADIUS protocol, either port 1812 will be used, but the system
can also be configured to use any port of your designation. Optional
RADIUS Accounting
on Configurable Port
1813
If the Dominion KX II is configured to remotely authenticate user logins
via the RADIUS protocol, and also employs RADIUS accounting for
event logging, port 1813 or an additional port of your designation will be
used to transfer log notifications.
SYSLOG on
Configurable UDP
Port 514
If the Dominion KX II is configured to send messages to a Syslog
server, then the indicated port(s) will be used for communication - uses
UDP Port 514.
SNMP Default UDP
Ports
Port 161 is used for inbound/outbound read/write SNMP access and
port 162 is used for outbound traffic for SNMP traps. Optional
TCP Port 21 Port 21 is used for the Dominion KX II command line interface (when
you are working with Raritan Technical Support).