Filter
Top Products
Chapter 3: Working with Target Servers
71
Please note that mouse configurations will vary on different target
operating systems. Consult your OS guidelines for further details. Also
note that intelligent mouse synchronization does not work with UNIX
targets.
Absolute Mouse Mode
In this mode, absolute coordinates are used to keep the client and target
cursors in sync, even when the target mouse is set to a different
acceleration or speed. This mode is supported on servers with USB
ports.
To enter absolute mouse mode:
• Choose Mouse > Absolute.
Note: The absolute mouse setting requires a USB target system and is
the recommended mouse setting for KX II-101.
Note: Absolute Mouse Synchronization is available for use with the
virtual media-enabled USB CIM (D2CIM-VUSB and D2CIM-DVUSB)
only.
Single Mouse Cursor
Single Mouse mode uses only the target server mouse cursor and the
local mouse pointer no longer appears onscreen. While in single mouse
mode, the Synchronize Mouse command is not available (there is no
need to synchronize a single mouse cursor).
To enter single mouse mode, do the following:
1. Choose Mouse > Single Mouse Cursor.
2. Click the Single/Double Mouse Cursor button
in the toolbar.