Filter
Top Products
Chapter 7: Device Management
141
Naming the Power Strip (Port Page for Power Strips)
This Port page opens when you select a port from the Port Configuration
page that is connected to a Raritan remote power strip. The Type and
the Name fields are prepopulated.
Note: The (CIM) Type cannot be changed.
The following information is displayed for each outlet in the power strip:
[Outlet] Number, Name, and Port Association.
Use this page to name the power strip and its outlets. All names can be
up to 32 alphanumeric characters and can include special characters.
Note: When a power strip is associated with a target server (port), the
outlet name is replaced by the target server name (even if you assigned
another name to the outlet).
To name the power strip (and outlets):
Note: CommandCenter Service Gateway does not recognize power strip
names containing spaces.
1. Enter the Name of the power strip (if needed).
2. Change the [Outlet] Name if desired. (Outlet names default to the
outlet #.)