Filter
Top Products
Other Functions
91
2
B Set your originals.
C Press the
{
Start
}
key.
Copying automatically starts when the
{
Start
}
key indicator flashes red and
green and the machine is ready for copying.
Note
❒
In Connect Copy mode, copying starts when the master unit is ready for
copying.
❒
To cancel Auto Start, press the
{
Clear/Stop
}
key.
❒
In Connect Copy mode, press the
{
Clear/Stop
}
key on the master unit to
cancel Auto Start.
Original Beeper
The beeper sounds and an error message is displayed when you leave your orig-
inals on the exposure glass after copying.
Note
❒
You can adjust when the beeper sounds with the “Auto Response (Human)
Sensor” setting:
• If set to “Yes”, the beeper sounds as soon as you leave the machine after
copying.
• If set to “No”, the beeper sounds 2 seconds after copying. See “Auto Re-
sponse (Human) Sensor” in the System Settings manual.
❒
To cancel this function, see “Original Beeper” in
⇒
P.313
“General Features
2
/
3
”
.
Sample Copy
Use this function to check a copy set before making a long copy run.
Limitation
❒
This function can be used only when the Sort function has been turned on.
Note
❒
This function is only available on the master unit in Connect Copy mode.
A Select Sort and any other functions, then enter the number of copy sets to
be made.
B Set the originals.
C Press the
{
Sample Copy
}
key.
One copy set is delivered for proof copying.