Filter
Top Products
Copying
74
2
❒
In Connect Copy mode, you can set only cover sheet paper and slip sheet pa-
per for the Cover/Slip Sheet function in the bypass tray.
A Open the bypass tray.
B Adjust the guides to copy paper size.
Important
❒
If the guides are not flush with the copy paper, a skew image or paper mis-
feeds might occur.
C Lightly insert the copy paper face up until the beeper sounds.
The
k
indicator on the display automatically goes on.
1. Extender
Note
❒
The face side of the paper set is copied on.
❒
Do not stack paper over the limit mark, otherwise a skew image or paper
misfeeds might occur.
❒
If the beeper is turned off, lightly insert the copy paper until it stops. See
“Operation Panel Beeper” in the System Settings manual.
❒
When the document feeder is open, set the direction of the copy paper to
L
.
ZBQH050E
ZBQH040E
1