Filter
Top Products
How Connect Copy Works
225
4
How Connect Copy Works
In this manual, we refer to the two machines as the master unit and sub-unit re-
spectively.
1. Master unit
2. Sub-unit
As your original is scanned in, the image data is stored on the master unit hard
disk and transferred simultaneously to the sub-unit hard disk. As soon as scan-
ning has finished, copying starts.
The master unit is the machine at which you press the
[
Connect
]
key to enter Con-
nect Copy mode. When you do this, the other machine becomes the sub-unit.
You can use either machine as the master unit or sub-unit, but you cannot
change the relationship without exiting Connect Copy mode first.
Connectable Copier Models
• The master unit and sub-unit do not have to be same speed models.
• You can still use Connect Copy even if no optional finisher, booklet finisher,
or large capacity tray (LCT) is available. However, the optional finisher must
be installed in both units in order to use the Stack and Staple functions, the
optional finisher and punch kit must be installed in both units in order to use
the Punch function, and the optional booklet finisher must be installed in both
units in order to use the Stack and Saddle Stitch function.
ZBQP190E
Master Unit Sub-Unit
55 copies/minute copier 55 copies/minute copier
55 copies/minute copier 70 copies/minute copier
70 copies/minute copier 55 copies/minute copier
70 copies/minute copier 70 copies/minute copier