Filter
Top Products
Relationship Between Master Unit and Sub-Unit System Settings
239
4
Relationship Between Master Unit and
Sub-Unit System Settings
This section describes which System Settings are used by the master unit and
sub-unit in Connect Copy mode.
Note
❒
In Connect Copy mode, the
{
User Tools/Counter
}
key on the sub-unit is dis-
abled. To access the User Tools on the sub-unit, you need to exit Connect
Copy mode first.
Reference
For details, see the System Settings manual.
Symbol Meaning
✩
The master unit and sub-unit use each setting
←
Both units use the master unit setting
— Unrelated
★
Depends on the function
Menu Master
unit
Sub-unit Remarks
Basic Page 1
Operation Panel Beeper
✩✩
Ready Operation Panel
Beeper
✩✩
Copy Count Display — — The copy counter is always
displayed in count up mode.
Auto Response (Human)
Sensor
✩
Invalid Disabled even if the sub-unit
setting is “Yes”.
Auto Tray Switching
✩✩
Auto Off Timer
✩
—
Low Power Shift Time — — In Connect Copy mode, nei-
ther unit will enter any of En-
ergy Saver modes (Low
Power mode, Energy Saver
mode). When Connect Copy
is exited, the machines will
enter Energy Saver mode af-
ter the programmed delay
elapses.
Low Power Timer — —