Filter
Top Products
Stamp
187
2
Limitation
❒
You cannot use the bypass tray with this function.
❒
One message can be stamped at a time.
❒
In Connect Copy mode, register the same user stamp on the master unit and
sub-unit.
❒
If the position exceeds the page boundary, the stamp will not be printed on
copies.
Note
❒
You can change the print page with the User Tools.
❒
You can choose the default settings for the print page and the stamp position
with the User Tools. See “Stamp condition” and “Stamp position”in
⇒
P.325
“User Stamp”
.
❒
You can combine this function with only one Preset Stamp.
❒
You cannot combine the User Stamp function with the Image Repeat or Dou-
ble Copies function.
❒
The relationship between the direction in which you set the original and
stamp Orientation/Position is as follows:
❒
You can change the stamp position to top, bottom, left and right each way in
1mm, 0.1" steps. See “Stamp position” in
⇒
P.325
“User Stamp”
.
GCSTMP6E