Filter
Top Products
What to Do If Something Goes Wrong
250
5
Document Server
You cannot use Connect
Copy.
The sub-unit has been
switched off automatically
by the Weekly Timer func-
tion and is waiting for the
Key Operator Off Code to
be entered.
Press the [
Cancel
] key on
the master unit. Then on
the sub-unit enter the code
and press the [
#
] key.
Reference
See “Key Operator
Code for Off Setting” in
the System Settings
manual.
The sub-unit is not in Copy
mode (i.e., in Document
Server mode).
Press the [
Cancel
] key on
the master unit. Then press
the
{
Copy/New Job
}
key on
the sub-unit to switch over
to Copy mode.
The [
Connect
] key was
pressed simultaneously on
both the master unit and
sub-unit.
Press the [
Cancel
] key on
both the master unit and
sub-unit, then press the
[
Connect
] key on just one of
them.
L
indicator is lit on the sub-
unit.
Follow the instructions
shown on the display.
You cannot use Connect
Copy. The other machine is
in use.
The master unit is not in
Copy mode (i.e., in Docu-
ment Server mode).
Press the [
Cancel
] key on
the master unit. Then press
the
{
Copy/New Job
}
key on
the master unit to switch
over to Copy mode.
Problem Action
You forgot your password. Without the password, you cannot edit or
print the document. Scan the document
again.
You can delete all the saved documents at
once with the User Tools. See “Delete All
The Saved Files” in
⇒
P.331
“Count Man-
ager”
Make sure that no important document is
saved in the Document Server before de-
leting all of the saved documents.
Machine Status Problem/Cause Action